2020 has been an exceptionally challenging year for everyone. Its dramatic changes only highlighted the rampant issues there are with mental health within the working environment and communities.

As an employer your role is crucial. Mental wellbeing can be dramatically affected by the environment we are in and the stressors we are experiencing both at home and at work. At this moment in time, the lines between home and work are even more blurred adding to the negative impacts. 

As an employer, as with all hazards, action needs to be taken to ensure you are preventing risk and are supporting a healthy environment. As a part of this commitment, you need to promote efficient management of processes and people, have effective communications, and listen to the needs of those around you. When practicing this, actions to improve any work-related ill health concerns can be tackled and implemented. Imagine the positive impacts this could have to people and the business!

The ‘talking toolkit’ developed by the Health and Safety Executive is a useful resource that we often refer employers to. This toolkit can help employers have effective conversations with employees on how to prevent work-related stress, then use these discussions to act - where perhaps there are lapses.

It will also help you understand the management standards for stress, enabling you to proactively address work related ill health as part of your organisational planning. 

As we move into winter months, months which naturally wreak havoc on our general wellbeing the charity Mind, supported by The Royal Foundation and its partners have produced guidance and best practice for employers via the Mental Health at Work website another invaluable tool that can be used to tackle some of the issues present.

Please remember that talking can save lives. It also costs nothing. Something as simple as talking can lead on to effective solutions for people who may be struggling.

Let’s all keep well together.  

Read More

Keeping safety simple is at our core. Here is our round up of how the new UKCA marking affects you. 

The UKCA marking will apply to most products and goods that are currently subject to CE marking. UKCA marking will also apply to aerosol products. if you are a manufacturer or supplier ensure you understand your responsibilities. Head over to GOV.uk to download the technical guidance that applies to you and the markets you supply too. Head over here

The UKCA marking can be used from 1 January 2021. However, to allow businesses time to adjust to these requirements, you will still be able to use the CE mark until 1 January 2022. 

It's very important to remember the UKCA mark will not be recognised outside of Great Britain and products will still need to bear a CE mark to be sold in the EU and Northern Ireland.

Key points to remember: 

From 1st January 2022, all products placed on the GB market are required to be UKCA marked unless special arrangements, such as those for medical devices, are in place.

CE marking for medical devices will continue to be recognised in Great Britain until 30 June 2023 provided that GB and EU rules remain the same.

UKCA marking does not apply to existing stock for example products manufactured and ready to place on the market before 1st January 2021. This means that the CE Marking on products manufactured and placed on the market before 1st January 2021 will still be valid. 

If you are a consumer..

Going forward, ensure your equipment is marked accordingly. Checking whether a product carries the CE/UKCA mark is pretty straightforward. Manufacturers and or suppliers must make the declaration of performance available to their customers (potential and existing) available to see.

Best practice is to show CE/UKCA marking details within the products literature, within individual product instruction manuals and even on websites. This way consumers can have quick and easy access to this information.

Read More

Keeping COVID Secure this christmas

Whether your teams will be off, or still in over the festive period its important that remaining COVID secure continues and that everyone remains protected.

Those who are able to, they should still be working from home.

For those that cannot feasibly work from home and have to accomodate people coming to your site, ensure you keep up to date with the latest guidance.

Ensure your control measures remain in place to manage the risk from coronavirus. The key focus should continue to be: 

• Infection control: Keep cleaning and disinfecting touchpoints and surfaces frequently. Ensuring those with symptoms do not attend work or site. 
• Promote good hygiene practices: Keep washing hands frequently and sanitising as needed. 
• Cover up: Keep wearing face coverings as necessary. Remembering to dispose of them responsibly!
• Make space: Ensure social distancing continues. 

Read More

Getting back to work and COVID-19 compliance

As the Government looks to slowly start getting us back to work - there will be (and already are) many questions on what individual companies should do.

The general guidance that has been issued is very helpful but may not cover your individual requirements and anxieties. Consider whether you need additional help to determine what is necessary for your business.

Next Steps

All companies have a duty of care to look after their employees’ health. The Health & Safety Executive and Local Authorities will be looking to undertake random inspections to ensure the Risks from COVID-19 have been assessed and are being controlled by businesses.

Before returning, ensure your assessment is complete and the new way of working has been agreed and communicated with your workforce. Nobody wants to see their business, their employees, their families or their customers impacted by this disease. Communication will be key to prevent misinformation and promote sustainable safe and efficient working.

COVID Secure

All risk assessment findings need to be communicated. Furthermore, there is a Government Certificate to sign and display to show you have sufficiently addressed the concerns that COVID-19 raises. Businesses are urged to consider sharing the findings of their assessment on their website and, where you have over 50 employees this will be expected.

Getting Help

If you require any help or guidance in these strange times, we continue to work and are available to help with COVID-19 compliance. We are currently involved with various clients in producing procedures and business specific risk assessments. With our background in laboratory containment facilities and knowledge of biological hazards this is where our heart lies.

We are not just reserved for laboratories. We have been working hard with new and old customers alike in offices, maintenance services, self-employed whom work in other people’s properties and construction businesses. If you need any assistance, please feel free to reach out on 01223 265622 or Doates@healthsafetyworks.co.uk 

Links to Guidance

https://www.gov.uk/guidance/working-safely-during-coronavirus-covid-19

https://www.hse.gov.uk/news/working-safely-during-coronavirus-outbreak.htm

Read More

It's been a very challenging time trying to navigate through this pandemic but with the support of our employees, clients, friends and family we will see it through. Stay safe and stay home everyone. 

Read More

To our new and old customers. Unfortunately we are cancelling our April and May trainining dates.

Inline with the guidance and the potential for further restrictions we didn't feel it was right to continue (for both you and us) offering them at this time. We will however continue to review the situation and once we are in a position to start delivering our courses again we will be straight back to it. Afterall we love what we do and can't wait to get back to the 'norm'.

Please watch this space for updates. Thank you, as always, for your support and understanding.

Read More

Sadly we are hearing more and more stories of cases of Coronavirus. In line with the recent increase we have generated a guidance document on managing the risk in your workplace efficiently. Looking at useful ways to prevent the introduction or spread of the virus and looking at how you can maintain operations as things progress. 

Follow our link below and download our latest guidance on managing the Coronavirus risk in your workplace.

https://www.dropbox.com/sh/6oq6f17diia0r5x/AAAqn357sgDHxjNHjF-O3_bea?dl=0 

Read More

however help is still at hand - even whilst we are off.

If you urgently need assistance between December 24th & January 3rd please call 01223 265622 and leave a message.
Or you can pop an email over to doates@healthsafetyworks.co.uk / ltull@healthsafetyworks.co.uk
We will be checking in sporadically and will respond!

See you all in 2020

Read More

Between the pastel de nata and americanos (mine with milk please) it’s been an absolute pleasure to meet so many people, so happy in their employment, just through being given the opportunity to balance both work and home life in a way that suits them, and of course, the business.

The employees and businesses we have been working with have been demonstrating some serious commitment to making sure arrangements are suitable, risk is assessed (through us – shameless plugging I know) and ensuring they have appropriate systems in place to continue delivering these standards consistently.

Now, I understand this way of working will not be for all, but for the businesses we’ve acted for, it really is proving beneficial. Remote working can bring a whole host of benefits, starting with a greater feeling of flexibility, less commuting, a greater sense of trust and of course a reduction in overheads. As with anything, where there is a positive, there will be a negative. Some of the negatives can be why individuals would choose not to follow this path – after all working from home may not lend to a business model or to a person. Especially if you don’t like the idea of being away from the social aspect a workplace can offer, the need to self-motivate or the inability to physically separate work and home life. Some businesses also tend to just steer clear of it, if they aren’t comfortable in managing and delivering scopes remotely. Like we said, there is a lot of trust involved. I for one am a massive fan but can appreciate it has to be in the right circumstances.

Since discussing our recent trips – as you do – we’ve had people and businesses hang fire and in a moment of business orientated, self realisation, make a scribble on their to do list. As they also need to consider the implications and risks of home or remote working, as they themselves do it, or have those working for them that do.

So whats our point? Its an important area to control for businesses, even if not considered high risk, its one that shouldnt be forgotten. For those wishing to go it alone, we recommend using a checklist type approach. Covering key topics such as:

• Work environment

• Use of any hazardous substances

• Work Equipment /DSE Arrangements

• Lone Working

• Business Travel and,

• Isolated working / wellbeing

It’s also very handy to use pictures to capture the working environment. Again, by using technology (pictures or even videos) you can remotely review the arrangements and visit only where concerns arise.

Once satisfied that you have identified all key areas ensure you have adequate means to address any hazards, and where you don’t, introduce controls to do so. Simples. Home working can be a little bit of a learning curve. We’ve been to and reviewed an array of set ups. Some businesses get it right from the off, working with the individuals to match provisions to that of the office environment, others tweak it and others just simply haven’t done anything (which isnt where they need to be). BUT that is the purpose of these reviews, don’t be put off if you realise your arrangements aren’t hitting the mark or are a bit inconsistent. These reviews will allow you to see what needs to change and plan effectively.

Working from home is ‘normally’ relatively low risk administrative work. Therefore, it’s important to proactively manage the areas this type of work can affect (such as display screen equipment, wellbeing and general working environment) sensibly – being mindful not to overstep the boundaries, after all this is someone’s home as well as a place to work.

If, however you have individuals working on more hazardous activities such as using substances hazardous to health, using machinery or soldering etc. then more specific controls will be required to safeguard them. Again, you’ll be able to identify this through your assessment.

Hopefully you find this quick overview handy, however should you or your business need more assistance in managing the risk to remote or homeworkers, please feel free to get in touch on either 01223 265622 or 01502 446488. Even if its just to bounce some ideas off us...we always make time.

*Alternatively, the Health & Safety Executive and IOSH have lots of helpful information available through their websites!*

Read More

In January the Health and Safety Executive (HSE) shared with the Industry and Regulatory Forum their changes to the Welding control standards including the need for Local Exhaust Ventilation (LEV). This change will affect all businesses conducting welding operations in the UK.

This change has occurred following the reclassification of welding fumes to a group one carcinogen. It is now understood that all forms of welding fume can cause cancer.

The following raised control standards will be applied:

Where welding operations are undertaken indoors LEV should be used. If LEV is unable to control fume capture then Respiratory Protective Equipment (RPE) is also required.

RPE will be worn whilst conducting welding operations outdoors.

These raised control standards are effective immediately. They will be enforced under COSHH Regulation 7.

The HSE will be releasing confirmation of these changes, and appropriate information shortly.

In the meantime, as a business, if you conduct any welding operations, it is advised that you review your risk assessments and controls to ensure they meet the new standard.

Further guidance can be found on the BOHS Welding Fume Control Selector Tool - see Breathe Freely website. Alternatively, you can contact a member of the health and safety works family to discuss your specific needs.

Read More

So, how has the sentencing guideline changed things over the last two years? Well here’s our top picks and a small spot light on cases we’ve seen since the new guidelines came in to play.

•        The new sentencing guidelines provide a clear structure and starting point for issuing penalties to companies and individuals that commit health and safety offences. Previously, the guidelines were mainly defined to manage corporate manslaughter cases leaving little guidance on management of all other cases. Statistics issued by the HSE for 2016/17 show how significant the financial repercussions have been, with the HSE securing a 93% conviction rate and average fines reaching £126,000 per case, in comparison to 2014/15 which averaged £29,000.
•        Companies and individuals are not only being tried for incidents which resulted in actual harm or loss but where there was potential (be that through deliberate acts or insufficient understanding or management). Thus hopefully preventing poor practices and weak management strategies. Emphasising the need for safety cultures to improve. 
•        Each case is assessed through the same 9 stages. The first four assessment stages have been considered the most important by businesses as this will dictate the level of penalty or sentence delivered. The first stage is defining the potential level of harm and culpability. The seriousness of the harm will be classified in three ‘levels’. The level of culpability – one of the biggest factors, is scored from very high - which shows deliberate breaches through to Low, where it is shown an organization did not fall far from the standard.
•        What would render a business in the High Category? Examples include falling short of the recognised industry standards, ignoring concerns raised by employees or individuals, failing to implement changes after related incidents. Allowing breaches to continue – overdue actions anyone?
•         Fines start from approximately £300,000 and can reach upwards of £10,000,000. Where a business or individuals’ turnover is £50m+, there is allowance for fines to be totalled higher than the £10m  - this change is to ensure a proportionate sentence every time.
•        Roles within businesses are also assessed against the sentencing criteria where it is proven that the act occurred with consent, passive consent (Connivance) or neglect. Their individual involvement, understanding, foresight and judgement is also considered and will be acted upon during sentencing.
•        For businesses divided in to separate Legal entities (e.g. within a Group structure), their case will normally be held and assessed solely on the entity. But, businesses must note, that if the court feel it is in the best interest to base the assessment on the Group, this can and will be done.
•        Since the introduction of the guidelines, financial penalties remain the most common result of a conviction however, there has been an increase in the number of immediate and suspended custodial sentences delivered. 2016/17 saw an increase of immediate sentences go from 4 to 6 percent and suspended sentences double from 6 to 12 percent.   
•         As we have previously mentioned, the level of penalty imposed is assessed vigorously, with actual and potential harm a key consideration. Statistics released by the Health and Safety Executive have shown that breaches of the Gas Safety (Installation and Use) 1998 regulations has resulted in over half of the suspended and immediate sentences. Showing that those failing to take note of industry hazards and best practice will be held accountable for significant failings.

Case one: Gas Safety

A Hampshire-based utilities company was fined for dangerous gas installations found at the Royal Veterinary College in June 2018. Multiple gas leaks were found across the student village, putting hundreds of students housed on site at risk.

St. Alban’s Crown Court heard how Dimension Data Advanced Infrastructure Ltd had been sub-contracted to carry out gas, plumbing and above ground drainage work at the College in 2010 – 2011. Over 50 incorrect fittings had been used with cheaper water fittings being used instead of gas fittings. The installation was classified as ‘Immediately Dangerous’ under the gas safe classification scheme. At the time the work was carried out the business did not employ Gas Safe Registered personnel. Dimension Data Advanced Infrastructure Ltd of Fleet, Hampshire pleaded guilty to breaching Section 3 of the Health and Safety at Work Act 1974 and was fined £466,660 and ordered to pay costs of £11,548.68.

Case two: Workplace Transport

Redrow Homes Limited and WPI Civil Engineering Ltd were fined after the death of a scaffolder at the Redrow home construction site. In August 2013, 67-year-old Henry Jones was walking across the site in Knotty Ash when he was struck by a reversing dumper truck. Tragically, Mr. Jones was crushed under the rear wheels of the vehicle and died at the scene. Investigations found that there had been no action taken to maintain provisions separating pedestrians and work place transport.

Redrow Homes Limited pleaded guilty to Section 3(1) and Section 33(1)(c) of The Health and Safety at Work etc. Act 1974 and was fined £500,000 with costs of £101,000. WPI Civil Engineering Limited also pleaded guilty to breaching Section 3(1) and Section 33(1)(c) of the Health and Safety at Work etc. Act 1974 and was fined £300,000 with costs of £17,000.

Case three: Dangerous Substances and Explosive Atmospheres

A Norwich manufacturing firm was fined after two employees working with flammable substances in a spray booth were killed by an explosion. Norwich Crown Court heard how, on 13 July 2015, two workers who had been spraying welded steel buckets had died when the flammable vapour generated whilst cleaning or flushing a paint spray gun was ignited by one of the various sources of ignition present at the scene.

An investigation by the Health and Safety Executive found the immediate cause of the explosion to be the inconsistent and incomplete approach to health and safety by the company and its employees. This resulted in the lack of suitable control measures; specifically, a suitable and sufficient safe system of work for the activities in the spray booth.

Harford Attachments Limited pleaded guilty to breaching Section 2(1) of the Health & Safety at Work etc. Act 1974 and breaching Regulation 6(4)(f)(i) of the Dangerous Substances and Explosive Atmosphere Regulations 2002. They were fined £145,000 and ordered to pay costs of £65,900

In summary

Safeguarding employees, and all others, who can be affected by your operations, is your responsibility - it will not only eliminate the risk of receiving a penalty but also allow you to

•         maintain a strong reputation
•         deliver business success
•         make your business more attractive – to new employees or potential customers

and who doesn’t want that?

Ultimately, health, safety and environmental matters should be managed practically within your business, after all it has to work for you. Risks need to be identified and reduced through sensible and proportionate procedures and practice.

For further information on maintaining compliance, implementing safety management systems and best practice please feel free to get in touch with a member of the HSW team.

Read More

In honour of mental health awareness week, which is currently being promoted by the Mental Health Foundation, HSW’s SimplySafe bulletin has been produced to encourage businesses to tackle Work Related Stress.

The Health and Safety Executive (HSE), the enforcing body for health and safety in the workplace, has set three priority health targets for action during 2018 and beyond – these are occupational lung disease, musculoskeletal disorders (e.g. repetitive strain injury) and work-related stress (WRS).

WRS affects almost half-a-million workers and is the second most commonly reported cause of occupational ill-health in GB, accounting for 37% of work-related ill health cases and 45% of working days lost. Annually, stress, anxiety and depression results in 11.7 million working days lost at an estimated social and economic cost of £5.2 billion. Not only is WRS damaging to health and wellbeing, it can impact productivity, competitiveness, and profitability.

WRS is defined as a harmful reaction caused by undue pressures and demands at work. This is caused mainly by workload (44% of cases), lack of support (14%), threats or bullying (13%) or changes at work (8%)

The HSE is encouraging employers to take a proactive stance to managing WRS using the HSE Management Standards, these identify 6 aspects of work which can contribute to WRS:

• workload, work pattern and environment
• how much say a person has about the way they work
• support and positive relationships with line managers and colleagues
• staff understand their role within the organisation and prevention of conflicting roles
• how organisational change (large or small) is managed, including communication and training.

It is also important to have a clear Stress Policy, which focuses on:

• preventing stress by knowing its causes
• recognition of any symptoms that do occur (lack of energy, mood swings, lapses in concentration, headaches, tiredness, weight loss, absenteeism) and
• a clear process for managing cases.

If you have any questions or queries on how to manage stress in the work place, or you wish to have an informal chat about the topics covered, please feel free to get in touch with one of our advisors.

Alternatively, you can gather information from the HSE or contact the Mental Health Foundation https://www.mentalhealth.org.uk/campaigns/mental-health-awareness-week

Read More

Today we are back in, and back to it. Happy New Year to all of our amazing customers, new and old. Heres to everyone having a safe and prosperous year.

We hope you all had a fun and relaxing festive period, we know we did. Now we are ready to get straight back to it. 

Have you set your new years resolution or  your objectives and targets? if not, why not take this fresh start as the perfect opportunity to review last years safety performance and make some improvements or changes? Afterall there is no time like the present. 

If you need any help, we are always at hand here in the office or you could even jot it down, ready for our next visit! 

Have a great one guys.

The HSW Team 

Read More

In 2013/14 in the UK, 133 people were killed at work and 70 members of the public fatally injured in accidents connected to work, according to the Health and Safety Executive (HSE).

However, to date, there have been only eight convictions for corporate manslaughter in England and Wales since the legislation was introduced in 2007. The largest fine issued thus far was handed down just a few weeks ago when a company was found guilty of corporate manslaughter and fined £500,000 following the death of an employee.

Given the fact that £500,000 is the biggest fine handed out so far, it is evident that the proposals from the Sentencing Council to substantially increase the fines are set to shake things up and ensure that companies start to take health and safety more seriously.

Under tougher sentencing guidelines proposed in November, large firms convicted of corporate manslaughter will face fines of up to £20m.

Read More

This year has been very busy and we continue to develop as a Company.

The following Regulations are under review by the HSE:

CDM Regulations –

• the CDM-C role will go and there will be a principal designer role.
• removal of the domestic client exemption with transfer of current CDM duties to the contractor/designer
• introducing a duty on information, instruction, training and supervision to replace the duty to assess competence;
• replacement of the ACOP with tailored guidance          

PUWER ACOP

New ACOPs have been issued of the following:

Control of Asbestos Regulations  New ACOP, there were 5 key changes.

Legionnaires' disease. The control of legionella bacteria in water systems.  New guidance and ACOP.

Control of Substances Hazardous to Health Regulations New Guidance and ACOP

The HSE state this is to "to clarify and simplify practical advice to help dutyholders comply with the requirements of Control of Substances Hazardous to Health".

The main changes to the COSSH ACOP, released on 3 December, includes updating the material supporting regulations 7, 9, 10 and 11 to take account of legislative changes, such as the Regulations for the Registration, Evaluation, Authorisation and restriction of Chemicals (REACH) and the Classification, Labelling and Packaging of substances and mixtures (CLP).

Additionally, advice provided in the appendices to the previous ACOP has either been repositioned next to the relevant regulation or will be made available separately on the HSE website.

Workplace Health Safety and Welfare Regs 1992 ACOP has been up dated.

The 5 original DSEAR ACOP’s have been consolidated into a single document.

The ACOP for the Management of Health and Safety at Work 1992 has been removed and not replaced. The HSE now direct you to guidance on their website.

Finally HSG65 Managing for Health and Safety has been updated to simplify it.

HSW Ltd has been extremely busy over recent months with both new and existing customers.  We have recently started working with Biotech Company TwistDX undertaking a complete Health and Safety review covering their Science Park and Babraham Road premises.  We are also now working with Norwich Research Park where we have been asked to help with Laboratory Specifications.

Read More

We have been very busy over the last year, so we have had little time to upate this section of the website,

We are still working with  a pharmaceutical company  in developing their safety management system over their three sites. We are implementing a computer based CoSHH system that will help to ensure all SDS's are mainitained on line and up to date. This should safe a lot of time with the management of SDS's.

We have aslo been involved in property surveys and construction projects at Cambridge Colleges, these included boiler installations and lead roof work.

Earlier this year we were approached Cranfield University School Of applied science to look at their CoSHH procedures and practices.

This involved assessing CoSHH related safety in a variety of research environments:-

• Research Welding,
• Vehicle traction testing on loose surfaces,
• Soil, household waste and sewage sample dust exposure,
• Nanoparticle research
• Fermentation and analysis of sewage
• Exposure powdered metal coatings, this included exposure to silica, alumina, nickel and chrome.
• Testing to destruction of Formula One carbon fibre body structures.

We assessed the current procedures and controls and submitted a report with recommendations.  As can be seen from the Research involved this was not a straight forward application of the COSHH regulations.

• Along with the report we produced documentation to cover,
• Chemical Storage
• CoSHH Health Surveillance
• CoSHH Exposure Monitoring
• Guidance on Fume Cupboard and Microbiological Safety Cabinet Use
• Use of Nano Materials
• PPE Guidance

The Cranfield School of Biological Science’s aim was to obtain certification to OHSAS18001 which we are pleased to say that with our input to their CoSHH systems they achieved in April with only 3 minor non-conformities.

Read More

Health & Safety Works Ltd has been busy throughout the year looking into many different areas of H&S for clients.

This has varied from bespoke CoSHH and Risk Assessment training, Building Safety Surveys to Ergonomic Risk Assessments.

Across the last year we have 15 Clients on an annual retainer for HSW Ltd to be their named competent person for all H&S matters, as well as welcoming some new companies to our Client list; Bluestone Creative  an office based web design company, Abbey Barns a Private House Estate management company and SDM Construction amongst others.

Read More

The aim of this register is to help businesses find advice on managing their general health and safety risks. The register is only open to those health and safety consultants who have met certain standards within their professional bodies.

Part of the Government's review of H&S undertaken by Lord Young was that there should be a register for qualified consultants.
The register is now operational and HSW Ltd are pleased to be part of that register in that as Director of HSW Ltd I am on the register.

So now as David Oates CMIOSH CBiol MSB I can use the following logos with my name.

Read More

HSW Ltd has undertaken work for the following new clients over the last few months;

This includes forklift risk assessment for Halspan based in Essex, a safety review for Rand Europe, CoSHH training for Suffolk Constabulary, IOSH Working Safely for St. Faiths School in Cambridge, 2 air monitoring projects one for Isocyanates and styrene (see projects for more information), S&P Electrical contractors have appointed HSW Ltd to look after their Health and Safety, finally Wesley Coe based in Ely appointed us to carry out a Health and Safety audit, DSEAR, CoSHH and PUWER Risk Assessments.

Read More

Liver Research Foundation, UCL

HSW ltd has been appointed as Biological Safety Officer and competent person for the Foundation of Liver Research.  This research charity is based at university College London.  We have been contracted to undertake a full safety review and provide health and safety support.

Read More

HSW Ltd can now offer consultancy in the area of Regulatory Affairs - Medical Devices, Quality Assurance and Quality Systems.

Since the transfer of Oxoid Ely manufacturing facilities to Dartford, Jennie Oates has joined HSW Ltd as a consultant offering skills developed in the IVD industry. Jennie has a total of 23 years of experience so is well qualified in these areas, she has also held the role of safety adviser and chairman of the safety committee whilst working for the Company.

Read More

HSW Ltd had their first trade stand at the ERBI Bench to Boardroom networking event at Chilford Hall.

It was an interesting day for us and provided current clients and possibly new clients with information on the services HSW can offer.

A draw for a free half a days consultancy was won by Anne Rudge, Business Development Manager at Quality Care Cleaning Ltd, her comment after we had advised her on safety issues relating to an application for CHAS accreditation was 'a very useful win'.

Read More

We have been delighted to receive a number of client testimonials which we thought we would share below:

"IOSH Managing Safely Course

I recently attended the above Course which was organised by Health & Safety Works.

The course covered all the objectives in detail and provided me with a sound knowledge and insight into the application of health & safety requirements at work, both from a legislative and practical point of view.  It has greatly assisted in the running of a busy hall in London and has enabled us to comply fully with health & safety requirements.

Students were provided with up to date and informative literature that was of great benefit.  The course instructor. Mr David Oates was knowledgable and professional throughout and is an outstanding instructor. He kept control of the class and made the learning process interesting as well as informative often relating actual events to modules presented to the students in order to better understand the subject.

I would thoroughly recommend Health & Safety Works to any organisation who finds it necessary to have their staff trained in this important area of the workplace."

M Stein, Assistant Clerk       The Worshipful Company of Coopers

"The main reason for choosing Heath and Safety Works and continuing to use them is that they understand our needs due to the fact that they have worked in a laboratory environment for many years and understand the Health and Safety issues scientists face on a daily basis."

Richard Dickinson, Lab & Facilities Manager       Astex Therapeutics Ltd

"For a small company the requirement to undertake the necessary work to ensure compliance with health and safety legislation may seem a daunting prospect. We were delighted to have HSW recommended to us and they have proved invaluable in ensuring that we are meeting our responsibilities. Their pragamatic approach would be of great benefit to any SME looking to ensure H&S compliance."

David Herbert, Company Secretary

Sydney Hart Ltd

"Health and Safety Works consistently provide well delivered bespoke training courses."

Regulatory Compliance Manager

Oxoid (Ely) Ltd

Read More

We have taken on many new clients this year and have been helping them with all aspects of H&S. These include AATEC SERVICES LTD, i2, Stem Cell Technologies, Achieve IT Solutions, Burwell Maintanence Ltd, Industrial Site Services.

We have also been training for ERBI, Principle People, J Brock and Sons, Giuseppe Piran Limited and Grifols

We can help on any aspect of health and safety be it construction, offices, laboratories and we have speclist knowledge in the area of biotechnology, COSHH, DSEAR, REACH and CHIP.

Read More

IOSH Working & Managing Safely

We have public and company courses taking place though out the year - contact us to see if we can help! HSW Ltd is accredited as an IOSH provider of both the new 1 day Working Safely and the 4 day Managing safely training courses. If you require further information please contact us.

The new courses can be tried at the following web link:- http://www.iosh.co.uk.

Read More

If you are still not sure what you should be doing about REACH please call we may be able to guide you.

The new REACH legislation is with us. This legislation will bring in changes in chemical safety over many years that will be a challenge to all industries. If you need help understanding the implications of REACH please contact us.

Have you sorted out your chemical supplies - will you still be able to by the products you use?

Read More